Physics:Rule of mixtures

The upper and lower bounds on the elastic modulus of a composite material with the lower bound predicted by the rule of mixtures given here but the upper bound larger than the rule of mixtures given here. The actual elastic modulus lies between the curves.

In materials science, a general rule of mixtures is a weighted mean used to predict various properties of a composite material . It provides a theoretical upper- and lower-bound on properties such as the elastic modulus, ultimate tensile strength, thermal conductivity, and electrical conductivity. In general there are two models, one for axial loading (Voigt model), and one for transverse loading (Reuss model).

In general, for some material property $E$ (often the elastic modulus), the rule of mixtures states that the overall property in the direction parallel to the fibers may be as high as

$E_c=f{E}_f+(1-f)E_m$

where

• $f=\frac{V_f}{V_f+V_m}$ is the volume fraction of the fibers
• $E_f$ is the material property of the fibers
• $E_m$ is the material property of the matrix

It is a common mistake to believe that this is the upper-bound modulus for Young's modulus. The real upper-bound Young's modulus is larger than $E_c$ given by this formula. Even if both constituents are isotropic, the real upper bound is $E_c$ plus a term in the order of square of the difference of the Poisson's ratios of the two constituents.

The inverse rule of mixtures states that in the direction perpendicular to the fibers, the elastic modulus of a composite can be as low as

$E_c={(\frac{f}{E_f}+\frac{1-f}{E_m})}^{-1}.$

If the property under study is the elastic modulus, this quantity is called the lower-bound modulus, and corresponds to a transverse loading.

Derivation for elastic modulus

Voigt Modulus

Consider a composite material under uniaxial tension ${\sigma }_{\mathrm{\infty }}$. If the material is to stay intact, the strain of the fibers, ${ϵ}_f$ must equal the strain of the matrix, ${ϵ}_m$. Hooke's law for uniaxial tension hence gives

$\frac{{\sigma }_f}{E_f}={ϵ}_f={ϵ}_m=\frac{{\sigma }_m}{E_m}$

(1)

where ${\sigma }_f$, $E_f$, ${\sigma }_m$, $E_m$ are the stress and elastic modulus of the fibers and the matrix, respectively. Noting stress to be a force per unit area, a force balance gives that

${\sigma }_{\mathrm{\infty }}=f{\sigma }_f+(1-f){\sigma }_m$

(2)

where $f$ is the volume fraction of the fibers in the composite (and $1-f$ is the volume fraction of the matrix).

If it is assumed that the composite material behaves as a linear-elastic material, i.e., abiding Hooke's law ${\sigma }_{\mathrm{\infty }}=E_c{ϵ}_c$ for some elastic modulus of the composite $E_c$ and some strain of the composite ${ϵ}_c$, then equations 1 and 2 can be combined to give

$E_c{ϵ}_c=f{E}_f{ϵ}_f+(1-f)E_m{ϵ}_m.$

Finally, since ${ϵ}_c={ϵ}_f={ϵ}_m$, the overall elastic modulus of the composite can be expressed as

$E_c=f{E}_f+(1-f)E_m.$

Reuss modulus

Now let the composite material be loaded perpendicular to the fibers, assuming that ${\sigma }_{\mathrm{\infty }}={\sigma }_f={\sigma }_m$. The overall strain in the composite is distributed between the materials such that

${ϵ}_c=f{ϵ}_f+(1-f){ϵ}_m.$

The overall modulus in the material is then given by

$E_c=\frac{{\sigma }_{\mathrm{\infty }}}{{ϵ}_c}=\frac{{\sigma }_f}{f{ϵ}_f+(1-f){ϵ}_m}={(\frac{f}{E_f}+\frac{1-f}{E_m})}^{-1}$

since ${\sigma }_f=E{ϵ}_f$, ${\sigma }_m=E{ϵ}_m$.

Other properties

Similar derivations give the rules of mixtures for

• mass density:$${\rho }_c={\rho }_f\cdot f+{\rho }_M\cdot (1-f)$$ where f is the atomic percent of fiber in the mixture.
• ultimate tensile strength:$${(\frac{f}{{\sigma }_{UTS,f}}+\frac{1-f}{{\sigma }_{UTS,m}})}^{-1}\le {\sigma }_{UTS,c}\le f{\sigma }_{UTS,f}+(1-f){\sigma }_{UTS,m}$$
• thermal conductivity:$${(\frac{f}{k_f}+\frac{1-f}{k_m})}^{-1}\le k_c\le f{k}_f+(1-f)k_m$$
• electrical conductivity:$${(\frac{f}{{\sigma }_f}+\frac{1-f}{{\sigma }_m})}^{-1}\le {\sigma }_c\le f{\sigma }_f+(1-f){\sigma }_m$$

See also

When considering the empirical correlation of some physical properties and the chemical composition of compounds, other relationships, rules, or laws, also closely resembles the rule of mixtures:

• Amagat's law – Law of partial volumes of gases
• Gladstone–Dale equation – Optical analysis of liquids, glasses and crystals
• Kopp's law – Uses mass fraction
• Kopp–Neumann law – Specific heat for alloys
• Vegard's law – Crystal lattice parameters

External links

• Rule of mixtures calculator