Physics:Lindhard theory

From HandWiki

In condensed matter physics, Lindhard theory[1] is a method of calculating the effects of electric field screening by electrons in a solid. It is based on quantum mechanics (first-order perturbation theory) and the random phase approximation. It is named after Danish physicist Jens Lindhard, who first developed the theory in 1954.[2][3][4]

Thomas–Fermi screening and the plasma oscillations can be derived as a special case of the more general Lindhard formula. In particular, Thomas–Fermi screening is the limit of the Lindhard formula when the wavevector (the reciprocal of the length-scale of interest) is much smaller than the Fermi wavevector, i.e. the long-distance limit.[1] The Lorentz–Drude expression for the plasma oscillations are recovered in the dynamic case (long wavelengths, finite frequency).

This article uses cgs-Gaussian units.

Formula

The Lindhard formula for the longitudinal dielectric function is given by

ϵ(𝐪,ω)=1V𝐪𝐤f𝐤𝐪f𝐤(ω+iδ)+E𝐤𝐪E𝐤.

Here, δ is a positive infinitesimal constant, V𝐪 is Veff(𝐪)Vind(𝐪) and f𝐤 is the carrier distribution function which is the Fermi–Dirac distribution function for electrons in thermodynamic equilibrium. However this Lindhard formula is valid also for nonequilibrium distribution functions. It can be obtained by first-order perturbation theory and the random phase approximation (RPA).

Limiting cases

To understand the Lindhard formula, consider some limiting cases in 2 and 3 dimensions. The 1-dimensional case is also considered in other ways.

Long wavelength limit

In the long wavelength limit (𝐪0), Lindhard function reduces to

ϵ(𝐪=0,ω)1ωpl2ω,

where ωpl2=4πe2NL3m is the three-dimensional plasma frequency (in SI units, replace the factor 4π by 1/ϵ0.) For two-dimensional systems,

ωpl2(𝐪)=2πe2nqϵm.

This result recovers the plasma oscillations from the classical dielectric function from Drude model and from quantum mechanical free electron model.

Derivation in 3D

For the denominator of the Lindhard formula, we get

E𝐤𝐪E𝐤=22m(k22𝐤𝐪+q2)2k22m2𝐤𝐪m,

and for the numerator of the Lindhard formula, we get

f𝐤𝐪f𝐤=f𝐤𝐪𝐤f𝐤+f𝐤𝐪𝐤f𝐤.

Inserting these into the Lindhard formula and taking the δ0 limit, we obtain

ϵ(𝐪=0,ω0)1+V𝐪𝐤,iqif𝐤kiω02𝐤𝐪m1+V𝐪ω0𝐤,iqif𝐤ki(1+𝐤𝐪mω0)1+V𝐪ω0𝐤,iqif𝐤ki𝐤𝐪mω0=1V𝐪q2mω02𝐤f𝐤=1V𝐪q2Nmω02=14πe2ϵq2L3q2Nmω02=1ωpl2ω02.,

where we used E𝐤=ω𝐤 and V𝐪=4πe2ϵq2L3.

Derivation in 2D

First, consider the long wavelength limit (q0).

For the denominator of the Lindhard formula,

E𝐤𝐪E𝐤=22m(k22𝐤𝐪+q2)2k22m2𝐤𝐪m,

and for the numerator,

f𝐤𝐪f𝐤=f𝐤𝐪𝐤f𝐤+f𝐤𝐪𝐤f𝐤.

Inserting these into the Lindhard formula and taking the limit of δ0, we obtain

ϵ(0,ω)1+V𝐪𝐤,iqif𝐤kiω02𝐤𝐪m1+V𝐪ω0𝐤,iqif𝐤ki(1+𝐤𝐪mω0)1+V𝐪ω0𝐤,iqif𝐤ki𝐤𝐪mω0=1+V𝐪ω02d2k(L2π)2i,jqif𝐤kikjqjmω0=1+V𝐪L2mω022d2k(2π)2i,jqiqjkjf𝐤ki=1+V𝐪L2mω02i,jqiqj2d2k(2π)2kjf𝐤ki=1V𝐪L2mω02i,jqiqjnδij=12πe2ϵqL2L2mω02q2n=1ωpl2(𝐪)ω02,

where we used E𝐤=ϵ𝐤, V𝐪=2πe2ϵqL2 and ωpl2(𝐪)=2πe2nqϵm.

Static limit

Consider the static limit (ω+iδ0).

The Lindhard formula becomes

ϵ(𝐪,ω=0)=1V𝐪𝐤f𝐤𝐪f𝐤E𝐤𝐪E𝐤.

Inserting the above equalities for the denominator and numerator, we obtain

ϵ(𝐪,0)=1V𝐪𝐤,iqifki2𝐤𝐪m=1V𝐪𝐤,iqifki2𝐤𝐪m.

Assuming a thermal equilibrium Fermi–Dirac carrier distribution, we get

iqif𝐤ki=iqif𝐤μE𝐤ki=iqiki2mf𝐤μ

here, we used E𝐤=2k22m and E𝐤ki=2kim.

Therefore,

ϵ(𝐪,0)=1+V𝐪𝐤,iqiki2mf𝐤μ2𝐤𝐪m=1+V𝐪𝐤f𝐤μ=1+4πe2ϵq2μ1L3𝐤f𝐤=1+4πe2ϵq2μNL3=1+4πe2ϵq2nμ1+κ2q2.

Here,

κ

is the 3D screening wave number (3D inverse screening length) defined as

κ=4πe2ϵnμ

.

Then, the 3D statically screened Coulomb potential is given by

Vs(𝐪,ω=0)V𝐪ϵ(𝐪,0)=4πe2ϵq2L3q2+κ2q2=4πe2ϵL31q2+κ2.

And the inverse Fourier transformation of this result gives

Vs(r)=𝐪4πe2L3(q2+κ2)ei𝐪𝐫=e2reκr

known as the Yukawa potential. Note that in this Fourier transformation, which is basically a sum over all 𝐪, we used the expression for small |𝐪| for every value of 𝐪 which is not correct.

Statically screened potential(upper curved surface) and Coulomb potential(lower curved surface) in three dimensions

For a degenerated Fermi gas (T=0), the Fermi energy is given by

EF=22m(3π2n)23,

So the density is

n=13π2(2m2EF)32.

At T=0, EFμ, so nμ=32nEF.

Inserting this into the above 3D screening wave number equation, we obtain

κ=4πe2ϵnμ=6πe2nϵEF.

This result recovers the 3D wave number from Thomas–Fermi screening.

For reference, Debye–Hückel screening describes the non-degenerate limit case. The result is κ=4πe2nβϵ, known as the 3D Debye–Hückel screening wave number.

In two dimensions, the screening wave number is

κ=2πe2ϵnμ=2πe2ϵm2π(1e2βπn/m)=2me22ϵfk=0.

Note that this result is independent of n.


Derivation in 2D

Consider the static limit (ω+iδ0). The Lindhard formula becomes

ϵ(𝐪,0)=1V𝐪𝐤f𝐤𝐪f𝐤E𝐤𝐪E𝐤.

Inserting the above equalities for the denominator and numerator, we obtain

ϵ(𝐪,0)=1V𝐪𝐤,iqifki2𝐤𝐪m=1V𝐪𝐤,iqifki2𝐤𝐪m.

Assuming a thermal equilibrium Fermi–Dirac carrier distribution, we get

iqif𝐤ki=iqif𝐤μE𝐤ki=iqiki2mf𝐤μ.

Therefore,

ϵ(𝐪,0)=1+V𝐪𝐤,iqiki2mf𝐤μ2𝐤𝐪m=1+V𝐪𝐤f𝐤μ=1+2πe2ϵqL2μ𝐤f𝐤=1+2πe2ϵqμNL2=1+2πe2ϵqnμ1+κq.
κ is 2D screening wave number(2D inverse screening length) defined as
κ=2πe2ϵnμ

.

Then, the 2D statically screened Coulomb potential is given by
Vs(𝐪,ω=0)V𝐪ϵ(𝐪,0)=2πe2ϵqL2qq+κ=2πe2ϵL21q+κ.

It is known that the chemical potential of the 2-dimensional Fermi gas is given by

μ(n,T)=1βln(e2βπn/m1),

and μn=2πm11e2βπn/m.

Experiments on one dimensional systems

This time, consider some generalized case for lowering the dimension. The lower the dimension is, the weaker the screening effect. In lower dimension, some of the field lines pass through the barrier material wherein the screening has no effect. For the 1-dimensional case, we can guess that the screening affects only the field lines which are very close to the wire axis.

In real experiment, we should also take the 3D bulk screening effect into account even though we deal with 1D case like the single filament. The Thomas–Fermi screening has been applied to an electron gas confined to a filament and a coaxial cylinder.[5] For a K2Pt(CN)4Cl0.32·2.6H20 filament, it was found that the potential within the region between the filament and cylinder varies as ekeffr/r and its effective screening length is about 10 times that of metallic platinum.[5]

See also

References

  1. 1.0 1.1 N. W. Ashcroft and N. D. Mermin, Solid State Physics (Thomson Learning, Toronto, 1976)
  2. Lindhard, Jens (1954). "On the properties of a gas of charged particles". Danske Matematisk-fysiske Meddelelser 28 (8): 1–57. http://gymarkiv.sdu.dk/MFM/kdvs/mfm%2020-29/mfm-28-8.pdf. Retrieved 2016-09-28. 
  3. Andersen, Jens Ulrik; Sigmund, Peter (September 1998). "Jens Lindhard" (in en). Physics Today 51 (9): 89–90. doi:10.1063/1.882460. ISSN 0031-9228. Bibcode1998PhT....51i..89A. 
  4. Smith, Henrik (1983). "The Lindhard Function and the Teaching of Solid State Physics" (in en). Physica Scripta 28 (3): 287–293. doi:10.1088/0031-8949/28/3/005. ISSN 1402-4896. Bibcode1983PhyS...28..287S. http://stacks.iop.org/1402-4896/28/i=3/a=005. 
  5. 5.0 5.1 Davis, D. (1973). "Thomas-Fermi Screening in One Dimension". Physical Review B 7 (1): 129–135. doi:10.1103/PhysRevB.7.129. Bibcode1973PhRvB...7..129D. 

General

  • Haug, Hartmut; W. Koch, Stephan (2004). Quantum Theory of the Optical and Electronic Properties of Semiconductors (4th ed.). World Scientific Publishing Co. Pte. Ltd.. ISBN 978-981-238-609-0.