Physics:Covariant formulation of classical electromagnetism

From HandWiki
Short description: Ways of writing certain laws of physics
Main page: Physics:Mathematical descriptions of the electromagnetic field

The covariant formulation of classical electromagnetism refers to ways of writing the laws of classical electromagnetism (in particular, Maxwell's equations and the Lorentz force) in a form that is manifestly invariant under Lorentz transformations, in the formalism of special relativity using rectilinear inertial coordinate systems. These expressions both make it simple to prove that the laws of classical electromagnetism take the same form in any inertial coordinate system, and also provide a way to translate the fields and forces from one frame to another. However, this is not as general as Maxwell's equations in curved spacetime or non-rectilinear coordinate systems.

This article uses the classical treatment of tensors and Einstein summation convention throughout and the Minkowski metric has the form diag(+1, −1, −1, −1). Where the equations are specified as holding in a vacuum, one could instead regard them as the formulation of Maxwell's equations in terms of total charge and current.

For a more general overview of the relationships between classical electromagnetism and special relativity, including various conceptual implications of this picture, see Classical electromagnetism and special relativity.

Covariant objects

Preliminary four-vectors

Main page: Lorentz covariance

Lorentz tensors of the following kinds may be used in this article to describe bodies or particles:

The signs in the following tensor analysis depend on the convention used for the metric tensor. The convention used here is (+ − − −), corresponding to the Minkowski metric tensor: ημν=(1000010000100001)

Electromagnetic tensor

Main page: Physics:Electromagnetic tensor

The electromagnetic tensor is the combination of the electric and magnetic fields into a covariant antisymmetric tensor whose entries are B-field quantities.[1] Fαβ=(0Ex/cEy/cEz/cEx/c0BzByEy/cBz0BxEz/cByBx0) and the result of raising its indices is Fμν=defημαFαβηβν=(0Ex/cEy/cEz/cEx/c0BzByEy/cBz0BxEz/cByBx0). where E is the electric field, B the magnetic field, and c the speed of light.

Four-current

Main page: Physics:Four-current

The four-current is the contravariant four-vector which combines electric charge density ρ and electric current density j: Jα=(cρ,𝐣).

Four-potential

Main page: Physics:Four-potential

The electromagnetic four-potential is a covariant four-vector containing the electric potential (also called the scalar potential) ϕ and magnetic vector potential (or vector potential) A, as follows: Aα=(ϕ/c,𝐀).

The differential of the electromagnetic potential is Fαβ=αAββAα.

In the language of differential forms, which provides the generalisation to curved spacetimes, these are the components of a 1-form A=Aαdxα and a 2-form F=dA=12Fαβdxαdxβ respectively. Here, d is the exterior derivative and the wedge product.

Electromagnetic stress–energy tensor

Main page: Physics:Electromagnetic stress–energy tensor

The electromagnetic stress–energy tensor can be interpreted as the flux density of the momentum four-vector, and is a contravariant symmetric tensor that is the contribution of the electromagnetic fields to the overall stress–energy tensor: Tαβ=(ε0E2/2+B2/2μ0Sx/cSy/cSz/cSx/cσxxσxyσxzSy/cσyxσyyσyzSz/cσzxσzyσzz),

where ε0 is the electric permittivity of vacuum, μ0 is the magnetic permeability of vacuum, the Poynting vector is

𝐒=1μ0𝐄×𝐁

and the Maxwell stress tensor is given by σij=ε0EiEj+1μ0BiBj(12ε0E2+12μ0B2)δij.

The electromagnetic field tensor F constructs the electromagnetic stress–energy tensor T by the equation:[2] Tαβ=1μ0(ηανFνγFγβ+14ηαβFγνFγν) where η is the Minkowski metric tensor (with signature (+ − − −)). Notice that we use the fact that ε0μ0c2=1, which is predicted by Maxwell's equations.

Maxwell's equations in vacuum

Main page: Physics:Maxwell's equations

In vacuum (or for the microscopic equations, not including macroscopic material descriptions), Maxwell's equations can be written as two tensor equations.

The two inhomogeneous Maxwell's equations, Gauss's Law and Ampère's law (with Maxwell's correction) combine into (with (+ − − −) metric):[3]

Gauss–Ampère law

αFαβ=μ0Jβ

while the homogeneous equations – Faraday's law of induction and Gauss's law for magnetism combine to form σFμν+μFνσ+νFσμ=0, which may be written using Levi-Civita duality as:

GaussFaraday law

α(12εαβγδFγδ)=0

where Fαβ is the electromagnetic tensor, Jα is the four-current, εαβγδ is the Levi-Civita symbol, and the indices behave according to the Einstein summation convention.

Each of these tensor equations corresponds to four scalar equations, one for each value of β.

Using the antisymmetric tensor notation and comma notation for the partial derivative (see Ricci calculus), the second equation can also be written more compactly as: F[αβ,γ]=0.

In the absence of sources, Maxwell's equations reduce to: ννFαβ=def2Fαβ=def1c22Fαβt22Fαβ=0, which is an electromagnetic wave equation in the field strength tensor.

Maxwell's equations in the Lorenz gauge

Main page: Physics:Lorenz gauge condition

The Lorenz gauge condition is a Lorentz-invariant gauge condition. (This can be contrasted with other gauge conditions such as the Coulomb gauge, which if it holds in one inertial frame will generally not hold in any other.) It is expressed in terms of the four-potential as follows:

αAα=αAα=0.

In the Lorenz gauge, the microscopic Maxwell's equations can be written as:

2Aσ=μ0Jσ.

Lorentz force

Main page: Physics:Lorentz force

Charged particle

Lorentz force f on a charged particle (of charge q) in motion (instantaneous velocity v). The E field and B field vary in space and time.

Electromagnetic (EM) fields affect the motion of electrically charged matter: due to the Lorentz force. In this way, EM fields can be detected (with applications in particle physics, and natural occurrences such as in aurorae). In relativistic form, the Lorentz force uses the field strength tensor as follows.[4]

Expressed in terms of coordinate time t, it is: dpαdt=qFαβdxβdt,

where pα is the four-momentum, q is the charge, and xβ is the position.

Expressed in frame-independent form, we have the four-force

dpαdτ=qFαβuβ,

where uβ is the four-velocity, and τ is the particle's proper time, which is related to coordinate time by dt = γdτ.

Charge continuum

Lorentz force per spatial volume f on a continuous charge distribution (charge density ρ) in motion.

The density of force due to electromagnetism, whose spatial part is the Lorentz force, is given by fα=FαβJβ.

and is related to the electromagnetic stress–energy tensor by fα=Tαβ,βTαβxβ.

Conservation laws

Electric charge

The continuity equation: Jβ,β=defβJβ=βαFαβ/μ0=0. expresses charge conservation.

Electromagnetic energy–momentum

Using the Maxwell equations, one can see that the electromagnetic stress–energy tensor (defined above) satisfies the following differential equation, relating it to the electromagnetic tensor and the current four-vector Tαβ,β+FαβJβ=0 or ηανTνβ,β+FαβJβ=0, which expresses the conservation of linear momentum and energy by electromagnetic interactions.

Covariant objects in matter

Free and bound four-currents

In order to solve the equations of electromagnetism given here, it is necessary to add information about how to calculate the electric current, Jν Frequently, it is convenient to separate the current into two parts, the free current and the bound current, which are modeled by different equations; Jν=Jνfree+Jνbound, where Jνfree=(cρfree,𝐉free)=(c𝐃,𝐃t+×𝐇),Jνbound=(cρbound,𝐉bound)=(c𝐏,𝐏t+×𝐌).

Maxwell's macroscopic equations have been used, in addition the definitions of the electric displacement D and the magnetic intensity H: 𝐃=ε0𝐄+𝐏,𝐇=1μ0𝐁𝐌. where M is the magnetization and P the electric polarization.

Magnetization–polarization tensor

The bound current is derived from the P and M fields which form an antisymmetric contravariant magnetization-polarization tensor [1] [5] [6] [7] μν=(0PxcPycPzcPxc0MzMyPycMz0MxPzcMyMx0),

which determines the bound current Jνbound=μμν.

Electric displacement tensor

If this is combined with Fμν we get the antisymmetric contravariant electromagnetic displacement tensor which combines the D and H fields as follows: 𝒟μν=(0DxcDycDzcDxc0HzHyDycHz0HxDzcHyHx0).

The three field tensors are related by:

𝒟μν=1μ0Fμνμν

which is equivalent to the definitions of the D and H fields given above.

Maxwell's equations in matter

The result is that Ampère's law, ×𝐇=𝐉free+𝐃t, and Gauss's law, 𝐃=ρfree,

combine into one equation:

Gauss–Ampère law (matter)

Jνfree=μ𝒟μν

The bound current and free current as defined above are automatically and separately conserved νJνbound=0νJνfree=0.

Constitutive equations

Main page: Physics:Constitutive equation

Vacuum

In vacuum, the constitutive relations between the field tensor and displacement tensor are: μ0𝒟μν=ημαFαβηβν.

Antisymmetry reduces these 16 equations to just six independent equations. Because it is usual to define Fμν by Fμν=ημαFαβηβν, the constitutive equations may, in vacuum, be combined with the Gauss–Ampère law to get: βFαβ=μ0Jα.

The electromagnetic stress–energy tensor in terms of the displacement is: Tαπ=Fαβ𝒟πβ14δαπFμν𝒟μν, where δαπ is the Kronecker delta. When the upper index is lowered with η, it becomes symmetric and is part of the source of the gravitational field.

Linear, nondispersive matter

Thus we have reduced the problem of modeling the current, Jν to two (hopefully) easier problems — modeling the free current, Jνfree and modeling the magnetization and polarization, μν. For example, in the simplest materials at low frequencies, one has 𝐉free=σ𝐄𝐏=ε0χe𝐄𝐌=χm𝐇 where one is in the instantaneously comoving inertial frame of the material, σ is its electrical conductivity, χe is its electric susceptibility, and χm is its magnetic susceptibility.

The constitutive relations between the 𝒟 and F tensors, proposed by Minkowski for a linear materials (that is, E is proportional to D and B proportional to H), are: 𝒟μνuν=c2εFμνuν𝒟μνuν=1μFμνuν

where u is the four-velocity of material, ε and μ are respectively the proper permittivity and permeability of the material (i.e. in rest frame of material), and denotes the Hodge star operator.

Lagrangian for classical electrodynamics

Vacuum

The Lagrangian density for classical electrodynamics is composed by two components: a field component and a source component: =field+int=14μ0FαβFαβAαJα.

In the interaction term, the four-current should be understood as an abbreviation of many terms expressing the electric currents of other charged fields in terms of their variables; the four-current is not itself a fundamental field.

The Lagrange equations for the electromagnetic lagrangian density (Aα,βAα) can be stated as follows: β[(βAα)]Aα=0.

Noting Fλσ=Fμνημληνσ,Fμν=μAννAμ(μAν)(ρAσ)=δμρδνσ

the expression inside the square bracket is (βAα)= 14μ0 (FμνημληνσFλσ)(βAα)= 14μ0 ημληνσ(Fλσ(δμβδναδνβδμα)+Fμν(δλβδσαδσβδλα))= Fβαμ0.

The second term is Aα=Jα.

Therefore, the electromagnetic field's equations of motion are Fβαxβ=μ0Jα. which is the Gauss–Ampère equation above.

Matter

Separating the free currents from the bound currents, another way to write the Lagrangian density is as follows: =14μ0FαβFαβAαJfreeα+12Fαβαβ.

Using Lagrange equation, the equations of motion for 𝒟μν can be derived.

The equivalent expression in vector notation is:

=12(ε0E21μ0B2)ϕρfree+𝐀𝐉free+𝐄𝐏+𝐁𝐌.

See also

Notes and references

  1. 1.0 1.1 Vanderlinde, Jack (2004), classical electromagnetic theory, Springer, pp. 313–328, ISBN 9781402026997, https://books.google.com/books?id=HWrMET9_VpUC&q=electromagnetic+field+tensor+vanderlinde&pg=PA316 
  2. Classical Electrodynamics, Jackson, 3rd edition, page 609
  3. Classical Electrodynamics by Jackson, 3rd Edition, Chapter 11 Special Theory of Relativity
  4. The assumption is made that no forces other than those originating in E and B are present, that is, no gravitational, weak or strong forces.
  5. However, the assumption that Mμν, Dμν, and even Fμν, are relativistic tensors in a polarizable medium, is without foundation. The quantityAα=(ϕ/c,𝐀)is not a four vector in a polarizable medium, so Fαβ=αAββAα does not produce a tensor.
  6. Franklin, Jerrold, Can electromagnetic fields form tensors in a polarizable medium?, https://www.academia.edu/104227822 }
  7. Gonano, Carlo, Definition for Polarization P and Magnetization M Fully Consistent with Maxwell's Equations, https://www.jpier.org/PIERB/pier.php?paper=15100606 

Further reading