Physics:Atwood machine

From HandWiki
Short description: Classroom demonstration used to illustrate principles of classical mechanics
Illustration of the Atwood machine, 1905.

The Atwood machine (or Atwood's machine) was invented in 1784 by the English mathematician George Atwood as a laboratory experiment to verify the mechanical laws of motion with constant acceleration. Atwood's machine is a common classroom demonstration used to illustrate principles of classical mechanics.

The ideal Atwood machine consists of two objects of mass m1 and m2, connected by an inextensible massless string over an ideal massless pulley.[1]

Both masses experience uniform acceleration. When m1 = m2, the machine is in neutral equilibrium regardless of the position of the weights.

Equation for constant acceleration

The free body diagrams of the two hanging masses of the Atwood machine. Our sign convention, depicted by the acceleration vectors is that m1 accelerates downward and that m2 accelerates upward, as would be the case if m1 > m2

An equation for the acceleration can be derived by analyzing forces. Assuming a massless, inextensible string and an ideal massless pulley, the only forces to consider are: tension force (T), and the weight of the two masses (W1 and W2). To find an acceleration, consider the forces affecting each individual mass. Using Newton's second law (with a sign convention of m1>m2) derive a system of equations for the acceleration (a).

As a sign convention, assume that a is positive when downward for m1 and upward for m2. Weight of m1 and m2 is simply W1=m1g and W2=m2g respectively.

Forces affecting m1: m1gT=m1a Forces affecting m2: Tm2g=m2a and adding the two previous equations yields m1gm2g=m1a+m2a, and the concluding formula for acceleration a=gm1m2m1+m2

The Atwood machine is sometimes used to illustrate the Lagrangian method of deriving equations of motion.[2]

Equation for tension

It can be useful to know an equation for the tension in the string. To evaluate tension, substitute the equation for acceleration in either of the two force equations.

a=gm1m2m1+m2

For example, substituting into m1a=m1gT, results in T=2gm1m2m1+m2=2g1/m1+1/m2=mhgwhere mh=2m1m2m1+m2 is the harmonic mean of the two masses. The numerical value of mh is closer to the smaller of the two masses.

Equations for a pulley with inertia and friction

For very small mass differences between m1 and m2, the rotational inertia I of the pulley of radius r cannot be neglected. The angular acceleration of the pulley is given by the no-slip condition: α=ar, where α is the angular acceleration. The net torque is then: τnet=(T1T2)rτfriction=Iα

Combining with Newton's second law for the hanging masses, and solving for T1, T2, and a, we get:

Acceleration: a=g(m1m2)τfrictionrm1+m2+Ir2

Tension in string segment nearest m1: T1=m1g(2m2+Ir2+τfrictionrg)m1+m2+Ir2

Tension in string segment nearest m2: T2=m2g(2m1+Ir2+τfrictionrg)m1+m2+Ir2

Should bearing friction be negligible (but not the inertia of the pulley nor the traction of the string on the pulley rim), these equations simplify as the following results:


Acceleration: a=g(m1m2)m1+m2+Ir2

Tension in string segment nearest m1: T1=m1g(2m2+Ir2)m1+m2+Ir2

Tension in string segment nearest m2: T2=m2g(2m1+Ir2)m1+m2+Ir2

Practical implementations

Atwood's original illustrations show the main pulley's axle resting on the rims of another four wheels, to minimize friction forces from the bearings. Many historical implementations of the machine follow this design.

An elevator with a counterbalance approximates an ideal Atwood machine and thereby relieves the driving motor from the load of holding the elevator cab — it has to overcome only weight difference and inertia of the two masses. The same principle is used for funicular railways with two connected railway cars on inclined tracks, and for the elevators on the Eiffel Tower which counterbalance each other. Ski lifts are another example, where the gondolas move on a closed (continuous) pulley system up and down the mountain. The ski lift is similar to the counter-weighted elevator, but with a constraining force provided by the cable in the vertical dimension thereby achieving work in both the horizontal and vertical dimensions. Boat lifts are another type of counter-weighted elevator system approximating an Atwood machine.

See also

Notes

  1. Tipler, Paul A. (1991). Physics For Scientists and Engineers (3rd, extended ed.). New York: Worth Publishers. p. 160. ISBN 0-87901-432-6. https://archive.org/details/physicsforscient00tipl.  Chapter 6, example 6-13
  2. Goldstein, Herbert (1980). Classical Mechanics (2nd ed.). New Delhi: Addison-Wesley/Narosa Indian Student Edition. pp. 26–27. ISBN 81-85015-53-8.  Section 1-6, example 2