Kan fibration

From HandWiki
Short description: Map between simplicial sets with lifting property

In mathematics, Kan complexes and Kan fibrations are part of the theory of simplicial sets. Kan fibrations are the fibrations of the standard model category structure on simplicial sets and are therefore of fundamental importance. Kan complexes are the fibrant objects in this model category. The name is in honor of Daniel Kan.

Definitions

Definition of the standard n-simplex

The striped blue simplex in the domain has to exist in order for this map to be a Kan fibration

For each n ≥ 0, recall that the standard n-simplex, Δn, is the representable simplicial set

Δn(i)=HomΔ([i],[n])

Applying the geometric realization functor to this simplicial set gives a space homeomorphic to the topological standard n-simplex: the convex subspace of ℝn+1 consisting of all points (t0,,tn) such that the coordinates are non-negative and sum to 1.

Definition of a horn

For each k ≤ n, this has a subcomplex Λkn, the k-th horn inside Δn, corresponding to the boundary of the n-simplex, with the k-th face removed. This may be formally defined in various ways, as for instance the union of the images of the n maps Δn1Δn corresponding to all the other faces of Δn.[1] Horns of the form Λk2 sitting inside Δ2 look like the black V at the top of the adjacent image. If X is a simplicial set, then maps

s:ΛknX

correspond to collections of n (n1)-simplices satisfying a compatibility condition, one for each 0kn1. Explicitly, this condition can be written as follows. Write the (n1)-simplices as a list (s0,,sk1,sk+1,,sn) and require that

disj=dj1si for all i<j with i,jk.[2]

These conditions are satisfied for the (n1)-simplices of Λkn sitting inside Δn.

Definition of a Kan fibration

Lifting diagram for a Kan fibration

A map of simplicial sets f:XY is a Kan fibration if, for any n1 and 0kn, and for any maps s:ΛknX and y:ΔnY such that fs=yi (where i is the inclusion of Λkn in Δn), there exists a map x:ΔnX such that s=xi and y=fx. Stated this way, the definition is very similar to that of fibrations in topology (see also homotopy lifting property), whence the name "fibration".

Technical remarks

Using the correspondence between n-simplices of a simplicial set X and morphisms ΔnX (a consequence of the Yoneda lemma), this definition can be written in terms of simplices. The image of the map fs:ΛknY can be thought of as a horn as described above. Asking that fs factors through yi corresponds to requiring that there is an n-simplex in Y whose faces make up the horn from fs (together with one other face). Then the required map x:ΔnX corresponds to a simplex in X whose faces include the horn from s. The diagram to the right is an example in two dimensions. Since the black V in the lower diagram is filled in by the blue 2-simplex, if the black V above maps down to it then the striped blue 2-simplex has to exist, along with the dotted blue 1-simplex, mapping down in the obvious way.[3]

Kan complexes defined from Kan fibrations

A simplicial set

X

is called a Kan complex if the map from

X{*}

, the one-point simplicial set, is a Kan fibration. In the model category for simplicial sets,

{*}

is the terminal object and so a Kan complex is exactly the same as a fibrant object. Equivalently, this could be stated as: if every map

α:ΛknX

from a horn has an extension to

Δn

, meaning there is a lift

α~:ΔnX

such that

α=α~ι

for the inclusion map

ι:ΛknΔn

, then

X

is a Kan complex. Conversely, every Kan complex has this property, hence it gives a simple technical condition for a Kan complex.

Examples

Simplicial sets from singular homology

An important example comes from the construction of singular simplices used to define singular homology, called the singular functor[4]pg 7

S:TopsSets

.

Given a space

X

, define a singular

n

-simplex of X to be a continuous map from the standard topological

n

-simplex (as described above) to

X

,

f:ΔnX

Taking the set of these maps for all non-negative n gives a graded set,

S(X)=nSn(X).

To make this into a simplicial set, define face maps di:Sn(X)Sn1(X) by

(dif)(t0,,tn1)=f(t0,,ti1,0,ti,,tn1)

and degeneracy maps si:Sn(X)Sn+1(X) by

(sif)(t0,,tn+1)=f(t0,,ti1,ti+ti+1,ti+2,,tn+1).

Since the union of any n+1 faces of Δn+1 is a strong deformation retract of Δn+1, any continuous function defined on these faces can be extended to Δn+1, which shows that S(X) is a Kan complex.[5]

Relation with geometric realization

It is worth noting the singular functor is right adjoint to the geometric realization functor

||:sSetsTop

giving the isomorphism

HomTop(|X|,Y)HomsSets(X,S(Y))

Simplicial sets underlying simplicial groups

It can be shown that the simplicial set underlying a simplicial group is always fibrant[4]pg 12. In particular, for a simplicial abelian group, its geometric realization is homotopy equivalent to a product of Eilenberg-Maclane spaces

iIK(Ai,ni)

In particular, this includes classifying spaces. So the spaces

S1K(,1)

,

K(,2)

, and the infinite lens spaces

LqK(/q,2)

are correspond to Kan complexes of some simplicial set. In fact, this set can be constructed explicitly using the Dold–Kan correspondence of a chain complex and taking the underlying simplicial set of the simplicial abelian group.

Geometric realizations of small groupoids

Another important source of examples are the simplicial sets associated to a small groupoid 𝒢. This is defined as the geometric realization of the simplicial set [Δop,𝒢] and is typically denoted B𝒢. We could have also replaced 𝒢 with an infinity groupoid. It is conjectured that the homotopy category of geometric realizations of infinity groupoids is equivalent to the homotopy category of homotopy types. This is called the homotopy hypothesis.

Non-example: standard n-simplex

It turns out the standard

n

-simplex

Δn

is not a Kan complex[6]pg 38. The construction of a counter example in general can be found by looking at a low dimensional example, say

Δ1

. Taking the map

Λ02Δ1

sending

[0,2][0,0][0,1][0,1]

gives a counter example since it cannot be extended to a map

Δ2Δ1

because the maps have to be order preserving. If there was a map, it would have to send

001120

but this isn't a map of simplicial sets.

Categorical properties

Simplicial enrichment and function complexes

For simplicial sets

X,Y

there is an associated simplicial set called the function complex

Hom(X,Y)

, where the simplices are defined as

Homn(X,Y)=HomsSets(X×Δn,Y)

and for an ordinal map

θ:[m][n]

there is an induced map

θ*:Hom(X,Y)nHom(X,Y)m

(since the first factor of Hom is contravariant) defined by sending a map

f:X×ΔnY

to the composition

X×Δm1×θX×ΔnfY

Exponential law

This complex has the following exponential law of simplicial sets

ev*:HomsSets(K,Hom(X,Y))HomsSets(X×K,Y)

which sends a map

f:KHom(X,Y)

to the composite map

X×K1×gX×Hom(X,Y)evY

where ev(x,f)=f(x,ιn) for ιnHomΔ([n],[n]) lifted to the n-simplex Δn. ^

Kan fibrations and pull-backs

Given a (Kan) fibration

p:XY

and an inclusion of simplicial sets

i:KL

, there is a fibration[4] pg 21

Hom(L,X)(i*,p*)Hom(K,X)×Hom(K,Y)Hom(L,Y)

(where

Hom

is in the function complex in the category of simplicial sets) induced from the commutative diagram

Hom(L,X)p*Hom(L,Y)i*i*Hom(K,X)p*Hom(K,Y)

where

i*

is the pull-back map given by pre-composiiton and

p*

is the pushforward map given by post-composition. In particular, the previous fibration implies

p*:Hom(L,X)Hom(L,Y)

and

i*:Hom(L,Y)Hom(K,Y)

are fibrations.

Applications

Homotopy groups of Kan complexes

The homotopy groups of a fibrant simplicial set may be defined combinatorially, using horns, in a way that agrees with the homotopy groups of the topological space which realizes it. For a Kan complex

X

and a vertex

x:Δ0X

, as a set

πn(X,x)

is defined as the set of maps

α:ΔnX

of simplicial sets fitting into a certain commutative diagram:

πn(X,x)={α:ΔnX:ΔnαXxΔnΔ0}

Notice the fact

Δn

is mapped to a point is equivalent to the definition of the sphere

Sn

as the quotient

Bn/Bn

for the standard unit ball

Bn={xn:||x||eu1}

Defining the group structure requires a little more work. Essentially, given two maps

α,β:ΔnX

there is an associated

(n+1)

-simplice

ω:Δn+1X

such that

dnω:ΔnX

gives their addition. This map is well-defined up to simplicial homotopy classes of maps, giving the group structure. Moreover, the groups

πn(X,x)

are Abelian for

n2

. For

π0(X)

, it is defined as the homotopy classes

[x]

of vertex maps

x:Δ0X

.

Homotopy groups of simplicial sets

Using model categories, any simplicial set

X

has a fibrant replacement

X^

which is homotopy equivalent to

X

in the homotopy category of simplicial sets. Then, the homotopy groups of

X

can be defined as

πn(X,x):=πn(X^,x^)

where

x^

is a lift of

x:Δ0X

to

X^

. These fibrant replacements can be thought of a topological analogue of resolutions of a chain complex (such as a projective resolution or a flat resolution).

See also

References

  1. See Goerss and Jardine, page 7
  2. See May, page 2
  3. May uses this simplicial definition; see page 25
  4. 4.0 4.1 4.2 Goerss, Paul G.; Jardin, John F. (2009). Simplicial Homotopy Theory. Birkhäuser Basel. ISBN 978-3-0346-0188-7. OCLC 837507571. http://worldcat.org/oclc/837507571. 
  5. See May, page 3
  6. Friedman, Greg (2016-10-03). "An elementary illustrated introduction to simplicial sets". arXiv:0809.4221 [math.AT].
  • An elementary illustrated introduction to simplicial sets

Bibliography