Initial topology

From HandWiki
Revision as of 19:10, 6 February 2024 by imported>Ohm (link)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Coarsest topology making certain functions continuous

In general topology and related areas of mathematics, the initial topology (or induced topology[1][2] or weak topology or limit topology or projective topology) on a set X, with respect to a family of functions on X, is the coarsest topology on X that makes those functions continuous.

The subspace topology and product topology constructions are both special cases of initial topologies. Indeed, the initial topology construction can be viewed as a generalization of these.

The dual notion is the final topology, which for a given family of functions mapping to a set X is the finest topology on X that makes those functions continuous.

Definition

Given a set X and an indexed family (Yi)iI of topological spaces with functions fi:XYi, the initial topology τ on X is the coarsest topology on X such that each fi:(X,τ)Yi is continuous.

Definition in terms of open sets

If (τi)iI is a family of topologies X indexed by I, then the least upper bound topology of these topologies is the coarsest topology on X that is finer than each τi. This topology always exists and it is equal to the topology generated by iIτi.[3]

If for every iI, σi denotes the topology on Yi, then fi1(σi)={fi1(V):Vσi} is a topology on X, and the initial topology of the Yi by the mappings fi is the least upper bound topology of the I-indexed family of topologies fi1(σi) (for iI).[3] Explicitly, the initial topology is the collection of open sets generated by all sets of the form fi1(U), where U is an open set in Yi for some iI, under finite intersections and arbitrary unions.

Sets of the form fi1(V) are often called cylinder sets. If I contains exactly one element, then all the open sets of the initial topology (X,τ) are cylinder sets.

Examples

Several topological constructions can be regarded as special cases of the initial topology.

  • The subspace topology is the initial topology on the subspace with respect to the inclusion map.
  • The product topology is the initial topology with respect to the family of projection maps.
  • The inverse limit of any inverse system of spaces and continuous maps is the set-theoretic inverse limit together with the initial topology determined by the canonical morphisms.
  • The weak topology on a locally convex space is the initial topology with respect to the continuous linear forms of its dual space.
  • Given a family of topologies {τi} on a fixed set X the initial topology on X with respect to the functions idi:X(X,τi) is the supremum (or join) of the topologies {τi} in the lattice of topologies on X. That is, the initial topology τ is the topology generated by the union of the topologies {τi}.
  • A topological space is completely regular if and only if it has the initial topology with respect to its family of (bounded) real-valued continuous functions.
  • Every topological space X has the initial topology with respect to the family of continuous functions from X to the Sierpiński space.

Properties

Characteristic property

The initial topology on X can be characterized by the following characteristic property:
A function g from some space Z to X is continuous if and only if fig is continuous for each iI.[4]

Characteristic property of the initial topology
Characteristic property of the initial topology

Note that, despite looking quite similar, this is not a universal property. A categorical description is given below.

A filter on X converges to a point xX if and only if the prefilter fi() converges to fi(x) for every iI.[4]

Evaluation

By the universal property of the product topology, we know that any family of continuous maps fi:XYi determines a unique continuous map f:XiYix(fi(x))iI

This map is known as the evaluation map.

A family of maps {fi:XYi} is said to separate points in X if for all xy in X there exists some i such that fi(x)fi(y). The family {fi} separates points if and only if the associated evaluation map f is injective.

The evaluation map f will be a topological embedding if and only if X has the initial topology determined by the maps {fi} and this family of maps separates points in X.

Hausdorffness

If X has the initial topology induced by {fi:XYi} and if every Yi is Hausdorff, then X is a Hausdorff space if and only if these maps separate points on X.[3]

Transitivity of the initial topology

If X has the initial topology induced by the I-indexed family of mappings {fi:XYi} and if for every iI, the topology on Yi is the initial topology induced by some Ji-indexed family of mappings {gj:YiZj} (as j ranges over Ji), then the initial topology on X induced by {fi:XYi} is equal to the initial topology induced by the iIJi-indexed family of mappings {gjfi:XZj} as i ranges over I and j ranges over Ji.[5] Several important corollaries of this fact are now given.

In particular, if SX then the subspace topology that S inherits from X is equal to the initial topology induced by the inclusion map SX (defined by ss). Consequently, if X has the initial topology induced by {fi:XYi} then the subspace topology that S inherits from X is equal to the initial topology induced on S by the restrictions {fi|S:SYi} of the fi to S.[4]

The product topology on iYi is equal to the initial topology induced by the canonical projections pri:(xk)kIxi as i ranges over I.[4] Consequently, the initial topology on X induced by {fi:XYi} is equal to the inverse image of the product topology on iYi by the evaluation map f:XiYi.[4] Furthermore, if the maps {fi}iI separate points on X then the evaluation map is a homeomorphism onto the subspace f(X) of the product space iYi.[4]

Separating points from closed sets

If a space X comes equipped with a topology, it is often useful to know whether or not the topology on X is the initial topology induced by some family of maps on X. This section gives a sufficient (but not necessary) condition.

A family of maps {fi:XYi} separates points from closed sets in X if for all closed sets A in X and all x∉A, there exists some i such that fi(x)cl(fi(A)) where cl denotes the closure operator.

Theorem. A family of continuous maps {fi:XYi} separates points from closed sets if and only if the cylinder sets fi1(V), for V open in Yi, form a base for the topology on X.

It follows that whenever {fi} separates points from closed sets, the space X has the initial topology induced by the maps {fi}. The converse fails, since generally the cylinder sets will only form a subbase (and not a base) for the initial topology.

If the space X is a T0 space, then any collection of maps {fi} that separates points from closed sets in X must also separate points. In this case, the evaluation map will be an embedding.

Initial uniform structure

Main page: Uniform space

If (𝒰i)iI is a family of uniform structures on X indexed by I, then the least upper bound uniform structure of (𝒰i)iI is the coarsest uniform structure on X that is finer than each 𝒰i. This uniform always exists and it is equal to the filter on X×X generated by the filter subbase iI𝒰i.[6] If τi is the topology on X induced by the uniform structure 𝒰i then the topology on X associated with least upper bound uniform structure is equal to the least upper bound topology of (τi)iI.[6]

Now suppose that {fi:XYi} is a family of maps and for every iI, let 𝒰i be a uniform structure on Yi. Then the initial uniform structure of the Yi by the mappings fi is the unique coarsest uniform structure 𝒰 on X making all fi:(X,𝒰)(Yi,𝒰i) uniformly continuous.[6] It is equal to the least upper bound uniform structure of the I-indexed family of uniform structures fi1(𝒰i) (for iI).[6] The topology on X induced by 𝒰 is the coarsest topology on X such that every fi:XYi is continuous.[6] The initial uniform structure 𝒰 is also equal to the coarsest uniform structure such that the identity mappings id:(X,𝒰)(X,fi1(𝒰i)) are uniformly continuous.[6]

Hausdorffness: The topology on X induced by the initial uniform structure 𝒰 is Hausdorff if and only if for whenever x,yX are distinct (xy) then there exists some iI and some entourage Vi𝒰i of Yi such that (fi(x),fi(y))∉Vi.[6] Furthermore, if for every index iI, the topology on Yi induced by 𝒰i is Hausdorff then the topology on X induced by the initial uniform structure 𝒰 is Hausdorff if and only if the maps {fi:XYi} separate points on X[6] (or equivalently, if and only if the evaluation map f:XiYi is injective)

Uniform continuity: If 𝒰 is the initial uniform structure induced by the mappings {fi:XYi}, then a function g from some uniform space Z into (X,𝒰) is uniformly continuous if and only if fig:ZYi is uniformly continuous for each iI.[6]

Cauchy filter: A filter on X is a Cauchy filter on (X,𝒰) if and only if fi() is a Cauchy prefilter on Yi for every iI.[6]

Transitivity of the initial uniform structure: If the word "topology" is replaced with "uniform structure" in the statement of "transitivity of the initial topology" given above, then the resulting statement will also be true.

Categorical description

In the language of category theory, the initial topology construction can be described as follows. Let Y be the functor from a discrete category J to the category of topological spaces Top which maps jYj. Let U be the usual forgetful functor from Top to Set. The maps fj:XYj can then be thought of as a cone from X to UY. That is, (X,f) is an object of Cone(UY):=(ΔUY)—the category of cones to UY. More precisely, this cone (X,f) defines a U-structured cosink in Set.

The forgetful functor U:TopSet induces a functor U¯:Cone(Y)Cone(UY). The characteristic property of the initial topology is equivalent to the statement that there exists a universal morphism from U¯ to (X,f); that is, a terminal object in the category (U¯(X,f)).
Explicitly, this consists of an object I(X,f) in Cone(Y) together with a morphism ε:U¯I(X,f)(X,f) such that for any object (Z,g) in Cone(Y) and morphism φ:U¯(Z,g)(X,f) there exists a unique morphism ζ:(Z,g)I(X,f) such that the following diagram commutes:

The assignment (X,f)I(X,f) placing the initial topology on X extends to a functor I:Cone(UY)Cone(Y) which is right adjoint to the forgetful functor U¯. In fact, I is a right-inverse to U¯; since U¯I is the identity functor on Cone(UY).

See also

References

  1. Rudin, Walter (January 1, 1991). Functional Analysis. International Series in Pure and Applied Mathematics. 8 (Second ed.). New York, NY: McGraw-Hill Science/Engineering/Math. ISBN 978-0-07-054236-5. OCLC 21163277. https://archive.org/details/functionalanalys00rudi. 
  2. Adamson, Iain T. (1996). "Induced and Coinduced Topologies". A General Topology Workbook. Birkhäuser, Boston, MA. pp. 23–30. doi:10.1007/978-0-8176-8126-5_3. ISBN 978-0-8176-3844-3. https://link.springer.com/chapter/10.1007%2F978-0-8176-8126-5_3. Retrieved July 21, 2020. "... the topology induced on E by the family of mappings ..." 
  3. 3.0 3.1 3.2 Grothendieck 1973, p. 1.
  4. 4.0 4.1 4.2 4.3 4.4 4.5 Grothendieck 1973, p. 2.
  5. Grothendieck 1973, pp. 1-2.
  6. 6.00 6.01 6.02 6.03 6.04 6.05 6.06 6.07 6.08 6.09 Grothendieck 1973, p. 3.

Bibliography